Autofun BP 10

Description

Description

Autofun BP 10 has excellent flexibility what allows to use it on different surfaces while providing high vibration damping properties and heat insulation. Use for installation on doors, roof and interior panels of the car.
The material is installed at dry clean painted metal surface. Temperature in workroom must be plus 18-30°С. Self-adhesive material is released from protective tint and pressed carefully on the surface by metallic roller or rink is allowed.
Composition

Composition

Autofun BP 10 is a flexible product that comes as a layering sheet and can be applied to any complex surfaces providing high vibration dampening properties and heat insulation. Recommended areas for installation include doors, roof and interior panels.

Application

Use for installation on doors, roof and interior panels of the car.
The material is installed at dry clean painted metal surface. Temperature in workroom must be plus 18-30°С. Self-adhesive material is released from protective tint and pressed carefully on the surface by metallic roller or rink is allowed.

Storage

Products stored in a room at a temperature no higher than +40°C in the horizontal position on a flat surface at a distance of not less than 1 meter from the heating system in the conditions excluding moisture, oils and direct sunlight, stacked no more than 1 meter in height.

Sound Absorption Coefficient (%) 60;

Mass per m² (kg) 0.612;

Flammability (mm/min) Non-flammable 100;

Adhesion (N/cm) 2;

Packaging:

  7sh 50×37.5

10sh 100x75 Bulk pack